4.6kWh LiFePO4 RV Battery System
An integrated RV power solution combining a 4.6kWh LiFePO4 battery pack, 3000W pure sine wave inverter and charge controller in one compact unit. Designed for RV OEMs, van conversion builders, upfitters and off-grid mobile power projects.
Conventional RV Power Requires Multiple Components. This System Integrates Them into One Unit.
A conventional RV power system requires a separate battery, inverter and charge controller. ASOL integrates the main power functions into one compact unit, helping simplify installation and reduce external wiring.
Traditional RV wiring
- ✓Separate battery + inverter + charge controller to source and match
- ✓Hours of wiring, more connection points to fail
- ✓Added weight and a bulky install footprint
- ✓Arc & loose-connection hazards over time
ASOL 4.6kWh — one integrated all-in-one unit
- ✓Battery, 3000W inverter & controller in one enclosure
- ✓Plug-and-run — drastically less installation time
- ✓A single integrated system with a compact all-in-one footprint
- ✓Fewer connections = higher reliability & safety
Built for serious off-grid duty, not weekend trips.
LiFePO4 Battery Cells
LiFePO4 battery cells provide up to six times the cycle life of conventional lead-acid batteries and are designed for up to 10 years of service.
3000W pure sine output
Supports high-surge RV appliance circuits and onboard AC power distribution, with a 6000W peak surge.
Four Charging Methods
AC mains charging, solar charging, vehicle charging and new-energy vehicle charging provide flexible power replenishment for mobile and off-grid applications.
Intelligent BMS with 15 Safety Protections
The intelligent BMS provides 15 safety protection functions to support stable battery operation under different charging, discharging and temperature conditions.
Dual-Fan Intelligent Cooling
The dual-fan cooling system supports intelligent heat dissipation and stable operation under sustained loads.
Smart App Monitoring
Monitor battery level, voltage, charging status, discharging status and other operating information through the mobile app.
Intelligent BMS with 15 Safety Protections
The intelligent BMS provides 15 safety protection functions to support stable battery operation under different charging, discharging and temperature conditions.
Active-Balancing BMS
The intelligent active-balancing BMS helps maintain cell consistency, improve pack stability and extend battery service life.
- ✓ Overcharge, over-discharge & over-current protection
- ✓ Short-circuit & temperature protection
- ✓ Cell balancing & real-time status monitoring
4672Wh nominal energy for RV and off-grid applications.
- ✓ Usable energy: subject to BMS settings and operating conditions
- ✓ Rated cycle life: 4000+ cycles @ 80% DOD*
- ✓ Designed for long-term RV and off-grid applications
4000+ cycles @ 80% DOD. Actual service life depends on depth of discharge, charge and discharge rates, temperature and operating conditions.
Compare LiFePO4 and lead-acid for your operating profile.
Lead-acid can cost less up front. Compare usable energy, weight, cycle rating and service conditions before selecting a system.
Lead-Acid (AGM)
ASOL LiFePO4 4.6kWh
What to assess for long-term ownership
Want a project-specific comparison? Tell us your usage, discharge profile and local lead-acid pricing — we'll help assess lifecycle cost factors for your setup.
Figures are illustrative estimates for typical off-grid RV use and vary by usage, climate and local pricing. Comparisons reflect general LiFePO4-vs-AGM characteristics, not a specific competitor product.
Four Charging Methods
AC mains charging, solar charging, vehicle charging and new-energy vehicle charging provide flexible power replenishment for mobile and off-grid applications.
Four Power Output Modes
The integrated system supports high-power AC appliances, 12V DC equipment, emergency vehicle jump-start and auxiliary charging for compatible vehicles and outdoor equipment.
3000W Pure Sine Wave AC Output
3000W rated output with 6000W peak output for compatible AC appliances.
Regulated 12V DC Output
Supports compatible 12V DC equipment.
Emergency Vehicle Jump-Start
Provides emergency vehicle jump-start support when required.
Auxiliary Charging
For compatible vehicles and outdoor equipment.
A complete I/O panel — every port you need.
AC outlets, regulated 12V DC output, a main switch and an LED display, plus an Anderson connector, vehicle-charging and communication ports.
| Model | ASOL 4650P / 4.6kWh Intelligent RV Battery |
| Battery type | LiFePO4 (Lithium Iron Phosphate) |
| Nominal voltage | 12.8V DC |
| Nominal Energy | 4672Wh |
| Nominal Capacity | 365Ah |
| Usable Energy | Subject to BMS settings and operating conditions |
| AC output | 3000W rated, 6000W peak (10s), pure sine wave |
| Charging methods | AC mains charging, solar charging, vehicle charging and new-energy vehicle charging |
| Rated cycle life | 4000+ cycles @ 80% DOD* |
| BMS | Intelligent BMS with active balancing and 15 safety protection functions |
| Cooling | Dual-Fan Intelligent Cooling |
| Operating temp | -20°C to 65°C(low-temp version optional) |
| Dimensions (L×W×H) | 434 × 240 × 330 mm (standard configuration) |
| Net weight | 42 kg |
| Warranty | 5-Year Warranty · 7×24 After-Sales Support |
Suitable for Multiple Vehicle and Mobile Power Applications
Designed for compatible sedans, SUVs, off-road vehicles, Class C motorhomes, camper vans and other mobile or off-grid power applications.
Sedans
For compatible sedan power applications.
SUVs
For compatible SUV power applications.
Off-Road Vehicles
For compatible off-road vehicle power applications.
Class C Motorhomes
Integrated mobile power for compatible Class C motorhomes.
RVs and Camper Vans
Mobile power for compatible RV and camper van installations.
Mobile and Off-Grid Power Applications
Flexible power support for compatible mobile and off-grid projects.
Quality Assurance
Quality Assurance
Quality inspection and manufacturing control support consistent product performance.
5-Year Warranty
The product is covered by a five-year warranty.
7×24 After-Sales Support
After-sales support is available to assist with product and technical questions.
Designed for RV OEM and Mobile Power Projects
This 4.6kWh LiFePO4 RV battery system is suitable for RV manufacturers, camper builders, van conversion projects, overlanding vehicles, mobile workshops and off-grid power applications.
For project orders, ASOL can support capacity, BMS configuration, output interface, connector, display, labeling and packaging customization according to customer requirements.
Questions, answered.
What are the key specifications?
What inverter load can it support?
How can I charge the system?
What temperature range does it operate in?
What usable energy can I expect?
What affects service life?
Is it safe?
Do you offer OEM/ODM customization?
Can I order one system first?
Need a different RV battery system configuration? Let’s spec it.
To recommend the right RV battery system, please share your target capacity, inverter power, charging method, installation space, destination market and estimated order quantity. Our team will help confirm the suitable configuration for your project.
