25.6V Deep-Cycle LiFePO4 Battery
ASOL 25.6V 100Ah LiFePO4 Deep Cycle Battery
The ASOL 25.6V 100Ah LiFePO4 battery provides 2.56kWh of nominal energy for compatible 24V-class power systems and lead-acid replacement applications. The standard configuration supports 100A maximum continuous discharge and 150A peak discharge, with a 29.2V maximum charge voltage. It is suitable for compatible caravan, marine, golf cart, solar storage, remote monitoring and switching applications.
Product Features
2.56kWh Energy
The 25.6V 100Ah configuration provides 2560Wh of nominal energy for compatible 24V-class power systems.
100A Continuous Output
Supports up to 100A maximum continuous discharge for compatible loads and power systems.
150A Peak Output
Supports up to 150A peak discharge for short-duration load requirements.
Built-in BMS
Integrated battery management protection helps protect against over-charge, over-discharge, over-current, temperature and short-circuit conditions.
IP65 Protected Enclosure
The ABS enclosure is rated IP65 for compatible mobile, marine and industrial installation environments.
Expansion Options
Heating, Bluetooth, switch and display-screen functions can be reviewed according to the selected configuration and project requirements.
Technical Specifications — Standard Configuration
| Item | Specification |
|---|---|
| Nominal Voltage | 25.6V |
| Nominal Capacity | 100Ah |
| Capacity @20A | 5HR |
| Nominal Energy | 2560Wh / 2.56kWh |
| Internal Resistance | ≤50mΩ |
| Efficiency / Self Discharge | 99% / <3% per month |
| Max. Continuous Discharge Current | 100A |
| Peak Discharge Current | 150A |
| Discharge Cut-off Voltage | 21.6V |
| Recommended Charge Current | 50A |
| Max. Charge Current | 100A |
| Max. Charge Voltage | 29.2V |
| Charge Current (-20°C to -10°C) | ≤0.05C |
| Dimensions (L × W × H) | 484 × 168 × 240 mm (standard configuration) |
| Net / Gross Weight | 19 kg / 20.5 kg |
| Terminal Type | M8 Screw |
| Case Material / Protection | ABS Case / IP65 |
| Cell Type | Square Aluminum Case |
| Expansion Function | Heating / Bluetooth / Switch / Display Screen |
| Discharge / Charge / Storage Temperature | -20°C to 60°C / 0°C to 55°C / -20°C to 40°C |
| BMS High Temperature / Reconnect | 80°C / 50°C |
| Certificates / Documents | UN38.3 / MSDS |
Project Configuration Options
The specifications above describe the standard 25.6V 100Ah configuration shown on this page. Project-specific changes can be evaluated for compatible 24V-class power systems.
Need a different footprint? Custom enclosure dimensions and terminal layout can be evaluated based on available installation space and project requirements.
Available project options may include:
- Higher-current BMS and discharge requirements
- APP or Bluetooth monitoring, depending on the selected BMS
- Low-temperature charging protection
- Self-heating for selected project configurations
- Enclosure dimensions, terminals and mounting layout
- Charging current, wiring, connectors and series / parallel requirements
Final specifications depend on system architecture, cell and BMS selection, thermal requirements and project validation.
Need a different configuration?
Share your required voltage, capacity, installation space, continuous discharge current and application. We can evaluate a project-specific battery configuration.
REQUEST PRICINGCompatible Applications
Final suitability should be confirmed against system voltage, charger profile, continuous and peak load, available installation space, cable and terminal requirements and operating conditions.
Caravan & Camper
Marine
Golf Carts
Solar Energy Storage
Remote Monitoring
Switching & Backup Systems
Lead-Acid Replacement
The 25.6V 100Ah LiFePO4 battery can be evaluated as a replacement for compatible lead-acid, AGM or GEL battery systems where the system voltage, charger profile, current requirements and installation dimensions are suitable.
Electrical Compatibility
Confirm system voltage, charger voltage, charging profile and continuous and peak load.
Installation
Confirm the 484 × 168 × 240 mm installation space and M8 terminal requirements.
Current Requirements
Confirm that 100A continuous and 150A peak discharge capability meets the application requirement.
Operating Conditions
Confirm required charge, discharge and storage temperature conditions.
OEM / ODM Configuration Support
The standard 25.6V 100Ah configuration can be reviewed for project-specific requirements. Available expansion functions may include heating, Bluetooth monitoring, switch and display-screen options, subject to final configuration confirmation.
