What is Soft Pack LiPo Battery?
Soft Pack LiPo Battery (also called pouch cell or polymer lithium battery) features an aluminum-laminated film outer shell instead of a rigid metal cylinder. This innovative design offers significant advantages:
- Ultra-thin & Lightweight – 30-50% lighter than cylindrical batteries with same capacity
- Higher Energy Density – More power in smaller footprint
- Flexible Form Factor – Adaptable to various device designs
- No Pressure Vent – Safer than cylindrical cells under thermal stress
- Better Heat Dissipation – Efficient thermal management during high-rate discharge
Why ASOL 101752P Soft Pack LiPo Battery?
10C High Discharge Rate
- Continuous 10C discharge rate for maximum power output
- Peak discharge up to 7000mA (7A) for burst acceleration
- Low internal resistance (<=150mOmega) ensures stable voltage under load
- Perfect for high-demand RC applications
Soft Pack Advantages
- Aluminum-laminated polymer shell (not steel cylinder)
- Dimensions: 10.1 x 17.5 x 55mm – slim profile fits tight spaces
- Ultra-lightweight (~18g) for improved flight performance
- Flexible form factor adapts to various RC device designs
- No bulky cylindrical shape – fits thinner devices
Built-in Safety Protection
- Integrated Protection Circuit Module (PCM)
- Over-charge protection (4.25V+/-0.025V)
- Over-discharge protection (2.5V+/-0.05V)
- Short circuit protection
- Temperature protection
Long Service Life
-
=500 charge/discharge cycles
- Maintains 80%+ capacity after 500 cycles
- Consistent performance throughout battery life
Soft Pack LiPo vs Cylindrical Battery Comparison
| Feature | ASOL Soft Pack LiPo | Cylindrical Battery |
|---|---|---|
| Construction | Aluminum-laminated film shell | Steel or aluminum cylinder |
| Weight | Lightweight, ~30-50% lighter | Heavy rigid casing |
| Form Factor | Ultra-thin, flat, flexible shape | Fixed cylindrical shape |
| Energy Density | Higher Wh/kg ratio | Lower energy density |
| Discharge Rate | Optimized for high-C applications | Standard discharge rates |
| Heat Dissipation | Superior thermal management | Metal conducts heat away |
| Safety | No pressure vent required | Requires safety vent |
| Thickness | As thin as 3mm possible | Minimum ~14mm diameter |
| Customization | Flexible dimensions available | Limited to standard sizes |
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | ASOL |
| Model | 101752P |
| Battery Type | Soft Pack LiPo (Lithium Polymer) |
| Shell Material | Aluminum-Laminated Film |
| Configuration | 1S1P (1 Cell) |
| Nominal Voltage | 3.7V |
| Full Charge Voltage | 4.2V |
| Nominal Capacity | 700mAh |
| Energy | 2.59Wh |
| Dimensions | 10.1 x 17.5 x 55mm |
| Weight | Approx. 18g |
| Internal Resistance | <=150mOmega |
| Max Continuous Discharge | 10C (7000mA) |
| Max Pulse Discharge | 15C (10500mA) |
| Max Charge Current | 1C (700mA) |
| Charge Temperature | 0C to 45C |
| Discharge Temperature | -20C to 60C |
| Storage Temperature | -20C to 45C |
| Cycle Life | >=500 cycles |
| Connector | JST PH 2.0 / Custom |
Application Scenarios
Drone & UAV Applications
- Mini quadcopters and micro drones
- FPV racing drones and FPV quads
- Aerial photography drones
- Micro aerial vehicles (MAV)
- Indoor drones
RC Vehicle Applications
- RC cars (1/24, 1/28 scale)
- RC trucks and buggies
- RC helicopters
- RC airplanes and gliders
- RC boats and submarines
- High-rate RC toys
Robotics & DIY Projects
- Small robots and rovers
- Educational robotics kits
- Arduino/Pi powered projects
- Autonomous vehicles
- DIY electronics projects
Package Contents
- 1 x ASOL 101752P Soft Pack LiPo Battery
- Pre-installed PCM protection circuit
- Connector as ordered (JST PH 2.0 default)
Quality Certifications
UL1642 | CB (IEC62133) | KC (Korea) | PSE (Japan) | UN38.3 | CQC
All ASOL batteries pass strict quality control and international safety standards. UN38.3 certified for safe air transportation.
About ASOL Battery
ASOL Battery is a professional lithium battery manufacturer with 15+ years of experience. We specialize in soft pack LiPo batteries, lithium polymer batteries, 18650 batteries, and custom battery packs for consumer electronics, RC devices, medical equipment, and industrial applications. Trusted by manufacturers worldwide.
Shipping & Warranty
- Shipping: Worldwide shipping available. UN38.3 certified for safe air transport.
- Warranty: 12-month warranty against manufacturing defects.
- Technical Support: Professional technical support available.
Contact Information
| Contact | Details |
|---|---|
| info@asol-battery.com | |
| +86 15779858703 | |
| Website | www.asol-battery.com |
| Response Time | 24 Hours on Working Days |
